Buffalo TeraStation Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach NAS & Speicherserver Buffalo TeraStation herunter. Buffalo TeraStation User manual [en] Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 195
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen

Inhaltsverzeichnis

Seite 1 - User Manual

TeraStation 5000User ManualBuffalo Inc.www.buffalotech.com35012627 version 3.0

Seite 2 - Contents

10Chapter 1 InstallationInstallation1 Insert the TeraNavigator CD into your computer. TeraNavigator will launch.2 Click Begin Installation.3 Foll

Seite 3

1004 Select read-only or read & write for the shared folder’s attribute, check “FTP” under “LAN Protocol Support”, then click OK.

Seite 4

101Accessing the TeraStation with an FTP client• To access the TeraStation via FTP, configure your FTP client software with the following settings:Ho

Seite 5

102Chapter 7 BitTorrentBitTorrent is software used to download large files quickly. The information in this chapter is for users who are familiar wit

Seite 6

1035 Select the shared folder where the downloaded file will be saved, then click OK.6 Click OK.7 Change the icon next to “BitTorrent” from .8 Cl

Seite 7

104Chapter 8 MultimediaDLNADLNA is a set of guidelines for sharing digital media. The TeraStation includes a DLNA server compliant with the DLNA guid

Seite 8

1054 Enable “DLNA” under LAN Protocol Support, then click OK.5 Click Services.6 Change the icon next to “DLNA Server” from .7 Click the icon to

Seite 9

1068 Click Edit.9 Select an interval for DLNA server database updates and click OK.Playing FilesTo play back content from a DLNA-compatible device:1

Seite 10 - Chapter 1 Installation

1073 Click DLNA Client Access Permissions.4 A list of the MAC addresses, IP addresses, and device names of the DLNA-compatible devices connected to

Seite 11 - 5 Click Finish

108Disabling Playback from Specific DevicesYou may block specific DLNA devices from playing back media content.1 In Settings, click Services.2 Click

Seite 12

109iTunes ServerIf iTunes Server is enabled, computers on your network with iTunes can play music files stored on the TeraStation and transfer them to

Seite 13

11TS5400DTS5200DTS5400RNote:Use LAN port 1 for initial setup. After setup, you may connect a second cable to LAN port 2. If you use LAN port 2, config

Seite 14

1106 Click OK, then OK again.7 Move the iTunes Server slider to the position.Squeezebox ServerSqueezebox is a network music player by Logitech tha

Seite 15 - 4 Settings will open

1115 Click Browse.6 Select the shared folder that you want to make available to Squeezebox, then click OK.7 Enter port number (9001 is recommended)

Seite 16 - 4 Click Change Password

112Chapter 9 Surveillance ServerThe TeraStation supports streaming video from RTSP (Real Time Streaming Protocol) network cameras.Getting StartedThe

Seite 17

113Installing Client ToolsDownload the client tools below from www.buffalotech.com and install them on your computer.Camera Policies - Registers that

Seite 18 - Chapter 2 Configuration

114Enabling Surveillance CamerasEnable surveillance cameras in Settings.Note:First, complete the initial settings for the TeraStation and the network

Seite 19

1159 To enable Surveillance Cameras, change the slider from .Notes:• If the target shared folder specified as the storage location for recorded vid

Seite 20 - 3 Click Easy Admin

116To deactivate the license, click .5 Check that the “Surveillance Camera × 1 camera” and “HardDisk” were added to “Installed Licenses”.The free li

Seite 21 - 2 Click Create Folder

117Registering Recording PoliciesRegister the network camera that is used.1 Click Start - BUFFALO - BUFFALO Surveillance Server - Camera Policies.For

Seite 22 - Recycle Bin

118Note:Network cameras that are already in use are indicated by an asterisk (*) and they are gray.6 Enter the username and password, then click Next

Seite 23 - Hidden Shares

1198 Select the recording schedule, then click Next.9 Select the TeraStation where the video will be recorded, then click Next.

Seite 24 - 2 Click Create User

12Note:For Mac OS, select the TeraStation icon while holding down the control key, then click Configure.7 Click the IP Address tab, enter the desired

Seite 25 - Importing user information

12010 Check the registration information, and if it is correct, click Next.11 Click Next.An additional network camera can be registered by selecting “

Seite 26 - 2 Click Add Group

1212 Click Search.3 Recorded video clips are shown in the center of the screen. Click a video clip to start playback.This completes checking recordi

Seite 27 - Access Restrictions

122Export Recorded Data as a MOV Video FileTo export recorded data saved to the TeraStation as a MOV format video file:1 Click Start - BUFFALO - BUFF

Seite 28

1233 The search results are displayed. Click a thumbnail to start the media viewer.4 Select the section to export and click Export. This will regist

Seite 29 - Active Directory

1245 Open the Export screen, register the export information from “Export Job Configuration”, and click “Start Export”. The video is exported in MOV

Seite 30

125Moving Recorded Video Data to Another TeraStationFollow the procedure below to move (migrate) the recorded video data to another TeraStation.Note:A

Seite 31 - NT Domains

1262 Click and when the Create a Policy screen opens, enter “DuplicateTest” into the “Policy Name” field, select “Duplicate”, and click OK.3 Click

Seite 32

1272 Click , and when the Create a Policy screen is opened, enter “PurgeTest” into the “Policy Name” field, select “Purge”, and click OK.Click the “

Seite 33

1285 Click , and register the policy.This completes the registration of the policy. The job is executed at 2:00 AM Monday to Friday.Changing Where R

Seite 34

129Client UtilitiesCamera PoliciesCamera Policies is a software program that registers the network camera that will be used, and starts video recordin

Seite 35 - Chapter 4 Managing Storage

13Notes:• For best results, use an NTP server to maintain the time settings on the TeraStation and other network devices. Clocks for the network dev

Seite 36

130Live ViewerLive Viewer allows you to view video currently being recorded by a network camera.Note:To view the current video, the network camera mus

Seite 37 - Working with RAID Arrays

131The right side of the screen includes tools for creating and updating data service policies. The left side of the screen shows an overview of all d

Seite 38

132Surveillance Video ManagerSurveillance Video Manager is a software program for performing searches and exporting of recorded video data.Export Wind

Seite 39

133Network ActivityNetwork Activity is a software program that displays the TeraStations on which surveillance cameras are operating on the network, i

Seite 40 - RMM (RAID Mode Manager)

134Activating Additional LicensesPurchasing an additional license (sold separately) enables you to connect and use two or more cameras and use the mig

Seite 41

1354 Enter the product key for the license pack (sold separately), then click OK.5 Confirm that the new license was added to “Installed License”.You

Seite 42 - Adding an External Hard Drive

1364 Open the “License” tab, then make a note of the “Host Id”.5 Open the website below in web browser.http://buffalo.jp/support_s/camera_licence/6

Seite 43 - 1 In Settings, click Drives

13710 Select the TeraStation to which you want to add the license, right-click, and click Properties.11 Open the “License” tab, then click +.12 Select

Seite 44

13814 Check that the license pack was added to “Installed Licenses”.This completes authentication of an additional license.TroubleshootingIssue Possib

Seite 45

139Issue Possible Cause Possible SolutionI cannot view the network camera using Live Viewer.The network camera is not registered in some camera polici

Seite 46

1413 In NAS Navigator2, double-click your TeraStation’s icon. This will open the shared folder of the TeraStation. For Mac OS, the TeraStation is moun

Seite 47 - Encrypting Drives

140Chapter 10 Advanced FeaturesAntivirus SoftwareTrend Micro NAS SecurityTM can protect your network and data from software viruses, malware, and spy

Seite 48 - 2 Select Restore/Erase

1413 Click Options.4 Enter your username and password, then click Log On.You can log on with the TeraStation’s admin account.The default username an

Seite 49 - 3 Enter the settings

142Connecting through a Proxy ServerIf you must pass through a proxy server to connect to the Internet in your network environment, follow this proced

Seite 50 - 7 Click Create Folder

1431 From the left-side menu, click Administration - Product License.2 Enter the serial number from the “Trend Micro NAS SecurityTM License Pack Gui

Seite 51

1443 Select a time for updates to begin, an interval for updates, and an amount of time for updates to continue. Select the components to update. Cli

Seite 52

145.Virus ScanningThree types of virus scans are available:Real-time ScanThe virus scan runs in the background, scanning every file that you read or w

Seite 53 - 6 Click Add Group

146This starts the virus scan.If the scan finds a virus, the user can be notified in two ways:• The message “Virus alert I34” is normally shown on th

Seite 54

147This completes the procedure for checking the log.Online HelpFor more information on the antivirus software, refer to the online help. Follow the p

Seite 55 - 17 Click Create Folder

148Email NotificationYour TeraStation can send you email reports daily, or when settings are changed or an error occurs. Notification emails may be tr

Seite 56

1495 Enter your mail server settings and choose what events will trigger notification. Click OK to send a test email..Sleep ModeTo save energy, you c

Seite 57

15Note: For Mac OS, select the TeraStation icon while holding down the control key, then select Settings.3 Enter the username and password, then clic

Seite 58 - 13 Configure the settings

150Notes:• Up to three timers can be set.• The end time can be set from 0:00 to 27:45.The start time can be set from 0:00 to 23:45.If the end time i

Seite 59 - 1 Go to www.microsoft.com

151Example 4:When running at a current time of 10:00 WednesdayTimer 1: Every day 9:00-18:00Timer 2: Selected day of the week Wednesday 7:30-22:00Tim

Seite 60

152UPS (Uninterruptible Power Supply)If a UPS (sold separately) is attached, the TeraStation can be automatically shut down for protecting data in the

Seite 61 - 12 Click Close

153Port TrunkingTwo Ethernet cables can be used to establish two separate communication routes providing LAN port redundancy and improving communicati

Seite 62 - Use with Multiple Computers

1546 Connect the hub LAN port and TeraStation LAN port 2 using the second LAN cable. If you are using an intelligent switch, connect to a LAN port th

Seite 63

1555 Double-click the TeraStation server name.6 Double-click the icon of the connected printer (shared name is displayed).7 Select your printer, th

Seite 64

1568 When “The server for the printer does not have the correct printer driver installed. If you want to search for the proper driver, Click OK.” dis

Seite 65 - 3 Click Yes

1575 Click OK.6 Click Close.7 Click Applications.8 Change the icon next to “TeraSearch” from .9 Click the icon to the right of “TeraSearch”.10

Seite 66 - 2 Choose LVM

15811 Click Edit.12 Enter the port number that you want to use and the time that the index will be updated, then click OK.13 Open the following URL in

Seite 67 - Expanding the Volume Size

1594 Choose “Manual File Caching”, “Automatic File Caching”, or “Automatic Program and File Caching”, then click OK.Notes:Manual File Caching - User

Seite 68

16When all the LEDs on the front of the TeraStation turn off, the shutdown process is complete.Changing the PasswordAfter initial setup, follow this p

Seite 69 - 2 Click next to “iSCSI”

160Note:Offline files cannot be enabled if “Use Fast User Switching” is enabled. To change the setting, open “User Accounts” in Control Panel and sele

Seite 70

161Version Conflicts - A file conflict occurs if different changes were made simultaneously to the offline file and original data on the network. The

Seite 71 - 2. Status LEDs

1624 Enter DFS Root Folder Name.5 Click Add Link.6 Enter the link name, hostname, and shared folder name, then click OK.Notes:• TeraStations, Link

Seite 72

1631 Open Folder Setup.2 Choose the shared folder that will be accessible to the NFS client.3 Click Edit.4 Under LAN Protocol Support, enable “NFS

Seite 73

164Updating SSL KeyTo update a server certificate and a private key for SSL, follow this procedure.1 Click Management- next to “SSL”.2 Register “s

Seite 74

1656 Choose a shared folder for the web server , then click OK.7 Choose an external port, then click OK.The Web server is now configured.MySQL Serve

Seite 75

1665 Click Browse.6 Choose a shared folder for the MySQL server, then click OK.7 Choose an external port, then click OK.The MySQL server is now con

Seite 76

1675 Configure the desired settings, then click OK.SNMP is now configured.Saving and Recovering SettingsThe TeraStation’s settings can be saved to a

Seite 77 - Replacing a Media Cartridge

168• Use a USB memory device with at least 1 GB of space.• Any data on the USB memory device will be deleted. 4 From “Target USB drive”, select the

Seite 78 - Chapter 5 Backup

1693 Click next to “Restore/Erase”.4 From “Target USB drive”, select the USB memory device that is connected to the USB 2.0 port of the TeraStatio

Seite 79 - 1 In Settings, click Backup

175 Enter the new password (twice).6 Click OK. You have changed the admin password.

Seite 80 - 2 Click next to “Backup”

170LogsFollow this procedure to check the TeraStation’s logs.1 In Settings, click Management.2 Click next to “Logs”.3 Select a log to view.The fi

Seite 81 - 3 Click Create New Job

171Restoring Factory DefaultsTo initialize the TeraStation to its factory defaults, follow this procedure.1 In Settings, click Management.2 Click

Seite 82 - 5 Click Add

1723 Click Network Storage (NAS).4 Click your TeraStation model.5 Click Downloads.6 Click the downloadable file for your OS.Name, Date, Time, and

Seite 83 - 11 Click Close

173You can select a different NTP Server by clicking Name/Time/Language on the Management screen. The Name/Time/Language screen opens.• Click Time. •

Seite 84 - 4 Click Add

174Beep AlertsYou can set the TeraStation to beep when certain errors occur.1 In Settings, click Management.2 Select Notifications.3 Click Edit.4

Seite 85 - 10 Click Yes

1755 Configure your settings, then click OK.Jumbo FramesIf your other network devices support it, you may be able to increase network performance wit

Seite 86 - Using with UPS

176Notes:• To use jumbo frames (4102/7422/9216 bytes), your computer’s NICs and all switches, hubs, and routers on the transmission route need to sup

Seite 87 - Configuring Failover

1772 Right-click on your TeraStation’s icon, then choose Properties - IP Settings.Note:For Mac OS, click the TeraStation icon while holding down the

Seite 88 - 2 Choose Folder Setup

178Chapter 11 UtilitiesNAS Navigator2 for WindowsNAS Navigator2 is a utility program that makes it easy to display Settings, change the TeraStation’s

Seite 89

179Name DescriptionViewViewIcons:Displays icon.Details:Displays Name, Product Name, Workgroup, IP Address, Subnet Mask, and Default Gateway.Sort bySel

Seite 90

18Chapter 2 ConfigurationConfigure and administer your TeraStation using the Settings interface, accessible from a browser window. Open the interface

Seite 91 - 18 Click Choose Backup Disk

180Name DescriptionConfiguration Click Settings to open the configuration interface.IP AddressCheck Use DHCP to assign an IP address from the DHCP ser

Seite 92 - Copy from a USB Device

181NAS Navigator2 for MacNAS Navigator2 is a utility program that makes it easy to display Settings, change the TeraStation’s IP address, or check its

Seite 93 - Amazon S3

182Mount as Network DriveYou can map the shared folder as a network drive using NAS Navigator2 on Mac OS.1 Click the icon in the Dock.NAS Navigator

Seite 94 - 8 Click Close

183iSCSI Connection ToolThe iSCSI Connection Tool is a Windows utility that lets you use the TeraStation as an iSCSI drive.To launch it, click Start

Seite 95 - Chapter 6 Remote Access

184MenuName DescriptionFileRefresh Search for network devices on the LAN.Exit Closes the iSCSI Connection Tool.SetupConfiguration Opens the configurat

Seite 96

185Chapter 12 AppendixDiagramsTS5800DTS5600DTS5400D

Seite 97

186TS5200DTS5400R1 Power ButtonTo power on, connect the power cable and wait for 10 seconds, then press the power button.2 Info LEDIf there is a sta

Seite 98

18710 Reset ButtonTo shut down and reboot the TeraStation, hold down the Reset button.11 Status LEDsLEDs are lit green when hard drives are accessed.

Seite 99

188LCD DisplayThe LCD display can be cycled through different modes by pressing the display button on the front of the TeraStation. Also, the items di

Seite 100

189RAID I15ARRAYx ScanningExamining the error status of RAID array X.Note:Transfer speeds are slower during the examination process.-RAID I16ARRAYx Cr

Seite 101

19Note:If the time-out period is set to “10 minutes”, you will be logged out of Settings after 10 minutes of inactivity.4 Settings will open.Notes:•

Seite 102 - Chapter 7 BitTorrent

190Cartridgex I35Location errorA hard drive set as a media cartridge has been installed in the drive 1 slot.Connect to the slot that was set as a medi

Seite 103

191Surveillance I56Lack of LicenseThere are not enough surveillance camera server licenses.Purchase and register an additional license.Surveillance I5

Seite 104 - Chapter 8 Multimedia

192Default SettingsAdministrator’s Name adminPassword passwordShared folders“share” (for both Windows and Mac computers). The recycle bin is enabled o

Seite 105 - 5 Click Services

193LAN portInterface:IEEE802.3ab (1000BASE-T)IEEE802.3u (100BASE-TX)IEEE802.3 (10BASE-T)Transfer speed:1000 Mbps Full duplex (auto-negotiation)100 Mbp

Seite 106

194CompatibilityWindows and Mac computers with Ethernet interface.Note:The TeraStation requires an Ethernet connection with your computer for operatio

Seite 107

195KC기종별 사 용 자 안 내 문A급기기(업무용 정보통신기기)이 기기는 업무용(A급) 전자파적합기기로서 판매자 또는 사용자는 이 점을 주의하시기 바라며, 가정외의 지역에서 사용하는 것을 목적으로 합니다.BSMI警告使用者 :這是甲類的資訊產品, 在居住的環境中使用時, 可

Seite 108 - Supported File Types

2ContentsChapter 1 Installation ...10Installation ...

Seite 109 - 4 Click Browse

203 Click Easy Admin.4 The Easy Admin screen will open.Notes:• If you click any buttons , you will need to enter a username and password.• You can

Seite 110 - Squeezebox Server

21Chapter 3 Access RestrictionsYou may restrict access to specific shared folders.Notes:• Access restrictions can be set separately for each shared

Seite 111 - 9 Click Open Squeezebox

22Notes:• Names may contain up to 27 alphanumeric characters, hyphens (-), and underscores (_). Do not use a symbol as the first character in a name.

Seite 112 - Getting Started

23AccountsYour TeraStation username and password should be the same as your Windows username and password. If they are different, you may not be able

Seite 113 - Installing Client Tools

24• Configure hidden and read-only file attributes in Settings. Configuring them from within Windows is not supported and may cause unexpected behav

Seite 114

253 Enter the desired settings, then click OK.Notes:• Usernames may contain up to 20 characters, including hyphens (-), underscores (_), periods (.)

Seite 115

26• username3,password3,comment3Guidelines• Use commas (,) as separators. Do not put spaces before or after commas.• If a line has an incorrect fo

Seite 116

273 Enter settings, then click OK.Notes:• If the group ID field is left blank, a group ID is automatically assigned. Use numbers between 1000 and 19

Seite 117

283 Click Edit.4 Enable “Access Restrictions”.5 Select the level of access for the user or group you added.: Read and write access allowed: Read ac

Seite 118

296 Click OK.Notes:• If you log in from a Microsoft network domain, you can set access restrictions with users and groups from the domain.• If both

Seite 119

3Working with RAID Arrays ...37Using JBOD ...

Seite 120 - Checking Recording

307 Choose Folder Setup.8 Click a shared folder that you want to set access restrictions for.9 Click Edit.10 Enable “Access Restrictions”.11 Select

Seite 121 - Configuration

31NT DomainsIn an NT domain environment, the TeraStation uses account information from the NT domain server to set access restrictions for files and f

Seite 122

328 Click next to “Folder Setup”.9 Click a shared folder for which you want to set access restrictions.10 Click Edit.11 Enable “Access Restriction

Seite 123

33Delegating Authority to an External SMB ServerThe TeraStation can link to an authentication server for centralized management of user accounts and p

Seite 124 - Viewing Video Real-time

347 Create a shared folder for authentication on the TeraStation. Users registered to the specified authentication server are automatically registere

Seite 125

35Chapter 4 Managing StorageRAID ArraysTeraStations support many types of RAID. The type of RAID arrays available for use depends on how many drives

Seite 126

36RAID 5RAID 5 arrays are available for TeraStations with 3 or more hard drives. RAID 5 combines 3 or more drives into a single array. The usable spac

Seite 127

37Working with RAID ArraysRAID settings are available in Settings in the drives section.Using JBODWith JBOD, each hard drive in the TeraStation is add

Seite 128

382 Click the array to delete.Note:If the “RAID Mode” field is blank, the array is already in JBOD mode. Proceed to step 7.3 Click Delete RAID Array

Seite 129 - Camera Policies

39Configuring a Hot SpareIf you have a hot spare configured and an array fails, the TeraStation immediately switches over to the hot spare. To use a

Seite 130 - Data Service Policies

4Chapter 5 Backup ...78Back Up from the TeraStation ...

Seite 131 - Vault Admin

40RMM (RAID Mode Manager)With RMM, you can create or expand a RAID array without erasing the data on the drives.Changing from JBOD to RAID 1Hard drive

Seite 132 - Surveillance Video Manager

413 Choose a RAID array.Changing the RAID mode while adding a drive:Select the drive you want to add to the RAID array and choose the mode for the ar

Seite 133 - Mini Vault Stats

425 Change the icon next to “RAID Scanning” from .Adding an External Hard DriveConnect an External DriveYour TeraStation includes USB ports (the num

Seite 134

43Access Restrictions on External DrivesYou can set access restrictions on new drives. Refer to “Configuring Access Restrictions” for details.Note:Eve

Seite 135

44• USB-connected UPSs• USB printersBuffalo external USB drives are recommended.These devices are not supported• DUB and DIU series drives• Hubs,

Seite 136

454 Click Check. You have the option of deleting information files from Mac OS during the check if desired.Formatting DrivesNote:Under some circumsta

Seite 137

464 Select a format type, then click Format.5 The “Confirm Operation” screen will open. Enter the displayed number, then click OK.6 Depending on th

Seite 138 - Troubleshooting

47Encrypting DrivesInternal drives (and arrays) can be encrypted with 128-bit AES during formatting. Encrypted drives and arrays are then readable onl

Seite 139

48Erase Data on the TeraStation CompletelyUnder some circumstances, data from formatted drives can be recovered. The disk erasure process in this sect

Seite 140 - Chapter 10 Advanced Features

49Disk QuotasNotes:• When using quotas, disable the recycle bin or empty the trash folder often. The limited space includes the space used for trash.

Seite 141 - 3 Click Options

5Streaming to DLNA-compatible Devices ... 107Disabling Playback from Specific Devices ...

Seite 142 - Licenses

50• If you log in with a username, you can check the TeraStation name, IP address, workgroup, and drive status, and you can change your own password.

Seite 143 - Updating

51Notes:• Names may contain up to 27 alphanumeric characters, hyphens (-), and underscores (_). Do not use a symbol as the first character. • The de

Seite 144

5210 Select the level of access for the user you added.: Read and write access allowed: Read access allowed: Access prohibited11 Click OK.This complet

Seite 145 - 2 Click Scan now

53Notes:• Repeat steps 1 and 3 for each user in the group.• Usernames may contain up to 20 alphanumeric characters, hyphens (-), underscores (_), pe

Seite 146 - 3 Click Display Log

547 Enter the desired settings.Notes:• Group IDs may be between 1000 and 1999. Do not duplicate group IDs.• Group names may contain up to 20 alphan

Seite 147 - 2 Online help will open

5516 Choose Folder Setup. 17 Click Create Folder.18 Configure the desired settings.Notes:• Names may contain up to 27 alphanumeric characters, hyphen

Seite 148 - 4 Click Edit

5619 Enable “Access Restrictions”.20 Select level of access privileges for the group you added.: Read and write access allowed: Read access allowed: A

Seite 149

575 Click OK.6 Click Edit under “NAS Volume”.7 Click Create Volume.8 Configure the desired settings, then click OK.9 Click Close.10 Click Close.1

Seite 150

5813 Configure the settings.Notes:• The name may contain up to 27 alphanumeric characters, hyphens (-), and underscores (_). Do not use a symbol as t

Seite 151 - 3 Click Change

59Using the TeraStation as an iSCSI DeviceIntroductioniSCSI is a protocol for carrying SCSI commands over IP networks. Unlike traditional SAN protoco

Seite 152

6Surveillance Video Manager ... 132Network Activity ...

Seite 153 - Port Trunking

601 Connect the TeraStation’s Ethernet and power cables and configure the TeraStation’s IP address and its clock.2 In Settings, click Drives.Note:St

Seite 154 - Connecting a Printer

619 Click next to “iSCSI”.10 Click Create Volume.11 Enter a volume name, volume description, volume, and size, then click OK.12 Click Close.13 Conn

Seite 155

6214 The connected volume will be recognized by the computer as an unallocated volume. Assign and format the volume in Windows. When the format proces

Seite 156 - TeraSearch

63Notes:• Volumes that are currently in use cannot be connected.• If the TeraStation will be used regularly, check “Connect on Startup” before conne

Seite 157

64Note:If access restrictions are configured, enter your username and password.4 Select the volume to be connected and click Connect.The connected vo

Seite 158 - Offline Files

65is connected when this password matches the mutual authentication password that was set at the computer.Mutual Authentication Password Setup for You

Seite 159 - 6 Click Close

66Note:When connecting to the TeraStation from multiple computers, follow the above procedure to remove the registration from each computer.5 Disconn

Seite 160

67Note:If all drives and arrays are set to Enable LVM on Volume, online update cannot be used unless there is at least one LVM volume.4 The Confirm O

Seite 161 - 2 Click Edit

683 Click the volume you want to expand. 4 Enter a new size and click OK.5 Click OK.6 Click Close.Setting Access RestrictionsA username and passwo

Seite 162 - 7 Click OK

69Note:To use mutual authentication with access restrictions, configure the settings:• In the screen shown above, check “Mutual Authentication” and e

Seite 163 - Encrypting Data Transmission

7Setting Up a Printer with Windows XP ... 155TeraSearch ...

Seite 164 - Web Server

705 Click Close.Mutual authentication access restrictions by username and passwordTo set access restrictions using mutual authentication in addition

Seite 165 - MySQL Server

711. Error LEDGlows red if a drive has failed.2. Status LEDsThe failed drive’s status LED will be glowing a steady red. A drive with a red status L

Seite 166

722 The failed drive’s status LED will be glowing red. Push its unlock button and swing the lock mechanism out.Hard drives without red status LEDs li

Seite 167 - Saving Settings

734 Insert the new drive in the empty slot. Slide the drive in with the locking mechanism open.

Seite 168 - Troubleshooting:

745 Swing the lock back down until it clicks into place.

Seite 169

756 When the replacement hard drive is recognized, the status LED will flash red and the message “Press FuncSW I31 New Disk x ready” will be displaye

Seite 170 - To transfer logs

763 Pull out the drive cartridge and remove it from the TeraStation.4 Insert the new hard drive in the empty slot. Slide the drive in with the locki

Seite 171 - Updating the Firmware

778 For RAID 0When the replacement drive is recognized, the status LED will flash red and the message “Set From Web I32 New Diskx ready” will be displ

Seite 172

78Chapter 5 BackupBack Up from the TeraStationYou can back up TeraStation folders to:• A different folder on the TeraStation• Another LinkStation o

Seite 173 - 6 Click the Language tab

794 Check “Backup” from “LAN Protocol Support”, then click OK.Note:To configure a password, enter it in the “Remote Backup Password” field. Leave thi

Seite 174 - LCD and LEDs

8Chapter 11 Utilities ...178NAS Navigator2 for Windows ...

Seite 175 - Jumbo Frames

802 Click next to “Backup”.3 Click List of LinkStations and TeraStations.Check the IP address of the LinkStation or TeraStation that you want to s

Seite 176 - Changing the IP Address

81Configuring a Backup Job1 In Settings, click Backup.2 Click next to “Backup”.3 Click Create New Job.Note:Up to 8 backup jobs can be configured.

Seite 177

82The following types of backup jobs may be selected:Type Files includedNormal backup All files in the source will be backed up to the destination.Ove

Seite 178 - Chapter 11 Utilities

8310 Click OK.Tasks added to “Backup List” are displayed.11 Click Close.ReplicationReplication copies all data from a share to a share on a different

Seite 179

84• Added files on replication source copied to replication target when you click Run Differential Resync. Files only ex-ist on replication target ar

Seite 180 - Mount as Network Drive

85Notes:• A maximum of 64 shared folders can be configured for replication.• Shared folders with a backup password set cannot be selected as replica

Seite 181 - NAS Navigator2 for Mac

86Ethernet cable connection methods:Two different configurations for failover are available. With the first setup, if the main TeraStation fails, the

Seite 182

87Configuring Failover1 In Settings, click Backup.2 Open Failover.3 Click Enable Failover.4 Select a TeraStation to be the target backup device.5

Seite 183

88Network ProblemsIf network problems occur, the following messages may appear on the TeraStation’s LCD display even though neither TeraStation has fa

Seite 184

896 Click OK.7 Click Close.8 Click Backup.9 Click the icon by “Time Machine”.10 Click Edit.11 Click Browse.

Seite 186

9012 Select the shared folder that you set in the previous step, then click OK.13 Click OK.14 Click OK.15 Change the icon next to “Time Machine” from

Seite 187

9118 Click Choose Backup Disk.19 Select the TeraStation, then click Use for Backup.20 Enter a username and password with the rights to access the shar

Seite 188 - LCD Display

92Copy from a USB DeviceUse Direct Copy to copy from a USB device directly to the TeraStation.These devices are supported:• USB mass storage devices•

Seite 189

93Amazon S3Amazon S3 (Amazon Simple Storage Service) is a fee-based online storage service provided by Amazon. Follow the steps below to configure you

Seite 190

948 Click Close.Notes:• Enter the path from the “Target Folder” field in a browser window to access the files saved to Amazon S3.• To use after the

Seite 191

95Chapter 6 Remote AccessWebAccessWebAccess is a software program for accessing the files in the shared folder of your TeraStation from your computer

Seite 192 - Specifications

963 Configure the desired settings, then click OK.• To use SSL encryption for more secure data transfers, enable “HTTPS/SSL Encryption”. • You may

Seite 193

979 Navigate to File sharing - Folder setup and choose the folder you will use for WebAccess. Enable “WebAccess LAN protocol support”.Notes:• The fo

Seite 194 - Environmental Information

98WebAccess Settings DisableAllow AnonymousAllow All Groups and UsersInherited Folder PermissionsShared Folder SettingsShared Folder Attributes Set in

Seite 195

99Note:The selected folder is used internally by “WebAccess Remote”. Files are not added to this folder and the amount of used space does not increas

Kommentare zu diesen Handbüchern

Keine Kommentare