Buffalo TeraStation TS7120r Enterprise Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach NAS & Speicherserver Buffalo TeraStation TS7120r Enterprise herunter. Buffalo TeraStation TS7120r Enterprise Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 160
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen

Inhaltsverzeichnis

Seite 1 - User Manual

TeraStation 7000User Manualwww.buffalotech.com35012398-052014-01

Seite 2 - Contents

10USB hubs are not supported.9 Power ConnectorsUse the included power cables to connect these to a UPS, surge protector, or outlet.10 Power StatusGlo

Seite 3

1003 Click the Source tab and select the TeraStation where the recorded video data is saved under “Vault”.Note: If any is selected, recorded data for

Seite 4

1013 Click the Source tab and select the TeraStation on which recorded video is saved under “Vault”.4 Open the Criteria tab, and under “Miscellaneou

Seite 5

1026 Click and register the policy.This job is now set up to run at 2:00 AM Monday to Friday.Changing Where Recorded Video Is SavedFollow this proc

Seite 6

103Click to start the wizard where registration of network cameras and the recording schedule are performed.Click to start the camera configuratio

Seite 7

104Data Service PoliciesData Service Policies is a software program for creating data service policies. The policy types that can be created are shown

Seite 8

105Starts “Mini Vault Status” for enabling the display of basic monitoring information.Sets the security status.Shuts down or restarts a portion (Vaul

Seite 9 - Chapter 1 Installation

106All clients and TeraStations located on the network are indicated by and labels. These can be moved by dragging and dropping them. Clients are di

Seite 10 - Installation

1073 Open the License tab, then click +.If your default free license activation is not installed, see “Enabling the Free License” to install it.4 En

Seite 11

108You have now activated the additional license.TeraStation Not Connected to the Internet1 If the TeraStation is being used in an environment where

Seite 12

1095 Open the website below in web browser.http://buffalo.jp/support_s/camera_licence/6 From the license pack (sold separately), enter the product k

Seite 13

113 Follow the steps on the screen to connect the TeraStation’s Ethernet and power cables and turn it on.Note: Use LAN port 1 for initial setup. Afte

Seite 14 - 4 Settings will open

11011 Open the license tab, then click +.12 Select Import license file, then click Browse.13 Select the license file that was saved before, then click

Seite 15

111This completes authentication of an additional license.TroubleshootingIssue Possible Cause Possible SolutionVideo recording does not start.Surveill

Seite 16 - 5 Click on admin

112Issue Possible Cause Possible SolutionThere is no recorded data, or the recorded data cannot be found.A camera was added in camera policies while S

Seite 17 - Recovery Drive

113Chapter 10 Advanced FeaturesEmail NotificationYour TeraStation can send you email reports daily, or when settings are changed or an error occurs.

Seite 18 - Chapter 2 Configuration

114Sleep ModeTo save energy, you can specify times to put the TeraStation into sleep (standby) mode, where the hard drive and LEDs are turned off.1 I

Seite 19

115Notes: • Up to three timers can be set.• The time to enter sleep mode can be set from 0:00 to 3:45 of the next day.The time to wake from sleep mo

Seite 20 - 2 Click Create Folder

116Wake-on-LANThe TeraStation supports Wake-on-LAN, which allows it to be turned on remotely.1 In Settings, click Network.2 Click the icon to the

Seite 21 - Recycle Bin

1173 Connect the UPS and TeraStation using a USB cable or serial cable.4 Turn on the UPS, then the TeraStation.5 In Settings, click Management.6

Seite 22 - 2 Click Create User

118• Bidirectional communication is not supported i.e., remaining ink quantities and other printer status information is not supported.• If a multif

Seite 23 - 2 Click Add Group

1192 Move the print server switch to the position to enable the print server.3 Refer to the manual supplied with the printer.4 Click Start - Cont

Seite 24 - Access Restrictions

12If you are prompted to enter the administrator password for the TeraStation, it is “password” by default.8 Right-click on your TeraStation’s icon a

Seite 25 - 6 Click OK

120Power Supply FailureYou may configure the TeraStation to shut down automatically if a power supply fails in Management - Power.1 Navigate to Manag

Seite 26 - Active Directory

121IP RoutingIP routing allows viewing and editing the routing table. You may configure it in Network - IP Routing.1 Navigate to Network - IP Routing

Seite 27

1222 Browse to the folder whose settings you want to change.3 In the Hosts field, enter the hostnames or IP addresses (comma separated) of the devic

Seite 28 - NT Domains

1235 Click OK.6 Click Close.7 Click Applications.8 Move the TeraSearch switch to the position to enable TeraSearch.9 Click to the right of “T

Seite 29

124Offline FilesOffline files (included with many versions of Windows, can be used to access files in the TeraStation, mimicking the computer’s behavi

Seite 30 - 2 Choose Workgroup/Domain

125Note: Offline files cannot be enabled if “Use Fast User Switching” is enabled. To change the setting, open “User Accounts” in Control Panel and sel

Seite 31

12612 If the network is disconnected after synchronization is completed, the offline file function can be used.Offline files can be accessed by the or

Seite 32

127Note: If enabled, a DFS link target shared folder is created under the DFS root. If disabled, up to eight DFS link target shared folders can be cre

Seite 33 - Chapter 4 Managing Storage

128For help configuring your NetWare, Linux, or other UNIX clients for NFS support, please consult each client’s own documentation and support.1 Open

Seite 34 - 1 Select RAID

129Notes: • To restrict NFS access to a specific network or client, navigate to File Sharing - NFS - Services and click Edit. Enter the address of th

Seite 35

13Notes: • For best results, use an NTP server to maintain the time settings on the TeraStation and other network devices. Clocks for the network dev

Seite 36

130SSL KeysSSL keys are used during setup screen operations and FTP communication. SSL (Secure Socket Layer) is a type of encryption system called pub

Seite 37 - Changing from JBOD to RAID 1

1314 Click Edit.Note: The settings of the PHP language interpreter can be changed from “Edit php.ini”.5 Click Browse.6 Choose a shared folder for t

Seite 38 - 1 In Settings, click Drives

1322 Click the icon to the right of “MySQL Server”.3 Click Edit.4 Click Browse.5 Choose a shared folder for the MySQL server, then click OK.6 C

Seite 39 - Adding an External Hard Drive

1333 Click to the right of “SNMP”.4 Click Edit.5 Configure the desired settings, then click OK.Saving and Applying SettingsThe TeraStation’s sett

Seite 40 - Checking Drives

1343 Click to the right of “Restore/Erase”.4 From “Target USB drive”, select the USB memory device that is connected to the USB 2.0 port of the Te

Seite 41 - S.M.A.R.T

1355 Select “Transfer settings from a USB drive”, then click Execute.Recovering the TeraStationCreating a Recovery DriveA recovery drive can let you

Seite 42

1363 Connect a USB keyboard and a monitor to the TeraStation.4 Power on the TeraStation and repeatedly hit the F7 key over and over, twice per secon

Seite 43

1374 Select the type of log that you want to transfer from “Logs To Transfer”.5 Click OK.Notes: • You can also download logs from within Settings b

Seite 44 - Media Cartridges

138Note: At least 1 GB of free space on the TeraStation is required to update the firmware.To update from Settings:1 In Settings, click Management.2

Seite 45 - 3 Click Erase TeraStation

139By default, the TeraStation adjusts its clock automatically by using a default NTP server. This NTP server belongs to Internet Multi Feed Inc. For

Seite 46

14unplugging it. You can also shut it down and restart it remotely from Settings.Shutting down or Restart from Settings:1 Double-click the icon.2

Seite 47

140Beep AlertsYou can set the TeraStation to beep when certain errors occur.1 In Settings, click Management.2 Select Notifications.3 Click Edit.4

Seite 48

141Notes: • To use jumbo frames, your computer’s NICs and all switches, hubs, and routers on the network need to support jumbo frames. If any device

Seite 49

142Notes: • From the IP address list, other settings are available at the bottom left of the window. Click Change to modify the gateway and Wake-on-L

Seite 50 - Advanced iSCSI Settings

143Trunking Mode CharacteristicsXOR*Transmits network packets based on [(source MAC address XOR’d with destination MAC address) modulo NIC slave count

Seite 51

1445 Select the port trunking mode. Some modes allow the hash policy to be configured as well. Click OK.6 Click Save.7 Connect the second LAN port

Seite 52 - 11 Click Close

145Chapter 11 UtilitiesNAS Navigator2 for WindowsNAS Navigator2 is a utility program that makes it easy to display Settings, change the TeraStation’s

Seite 53 - Creating an iSCSI Volume

146Name DescriptionMenuMap Share*Assigns the TeraStation’s shared folder as a network drive.Disconnect Share*Unmaps the network drive.Map All Remote S

Seite 54 - Expanding the Volume Size

147Exit Exits NAS Navigator2.The following tasks may be performed from the TeraStation’s properties page.Name DescriptionConfiguration Click Settings

Seite 55 - Setting Access Restrictions

1483 An icon for the mapped share will appear in Computer or My Computer. You can use this network drive just like any other hard drive.Changing the

Seite 56

149• The following IP address are reserved and should not be used. If you configure one of them by accident, initialize all settings.Local loopback a

Seite 57 - 5 Click Close

155 Click at the top-right of Settings and choose either Restart or Shut Down.When all the LEDs on the front of the TeraStation turn off, the shutd

Seite 58

1501 Click the icon in the Dock. NAS Navigator2 will start.2 Click the TeraStation icon while holding down the control key, then select Open Folde

Seite 59 - Replacing a Media Cartridge

151Chapter 12 AppendixReplacing the BatteryAfter approximately 5 years, the CR2032 battery on the motherboard will need to be replaced. Use only the

Seite 60 - Chapter 5 Backup

1523 Remove the screw and bracket from the lower slot.4 Insert the expansion card in the lower slot (not the upper slot).5 Replace the screw.6 Fin

Seite 61 - 1 In Settings, click Backup

153EmulexOCe11102-N (dual-port)OCe11102-I (dual-port)OCe11102-F (dual-port)IntelX540T2 (dual-port)E10G42BTDA (dual-port)E10G41BFSR (single-port)E10

Seite 62 - 3 Click Create New Job

1545 Replace the screw.6 Find and connect the power connector.7 Close the cover.8 Reconnect the power cords.Errors Error codes can be viewed in Ma

Seite 63

155RAID Arrayx E14Can’t MountRAID array X cannot be mounted. Run the RAID array disk check in Settings.HDx Error E16HDx Not FoundUnable to find hard d

Seite 64 - Replication

156RAID I18ARRAYx RebuildingRebuilding RAID array x.Note: Transfer speeds are slower during the rebuilding process.-RAID I19ARRAYx 0 FillingWriting 0s

Seite 65 - 10 Click Yes

157Recovery I45Recovery FailedRecovery failed. -RAID ARRAY I46RMM+ProcessingData migration or conversion (RAID migration) is in progress.Do not turn o

Seite 66 - Failover

158Microsoft Network Group Name WORKGROUPEthernet Frame Size 1500 bytes (plus 14 bytes of header and 4 bytes of FCS)AFP EnabledFTP DisabledNTP Enabled

Seite 67 - Configuring Failover

159Supported OSWindows 8.1*, Windows 8*, Windows 7*, Windows Vista*, Windows XP*, Windows XP Media Center Edition (2004 or 2005), Windows Server 2012

Seite 68 - 2 Choose Folder Setup

163 Enter your username and password.4 In Settings, navigate to File Sharing - Users.5 Click on admin.6 Enter the new password (twice). Click OK.

Seite 69

160A급 기기(업무용 정보통신기기)이 기기는 업무용(A급) 전자파적합기기로서 판매자 또는 사용자는 이 점을 주의하시기 바라며, 가정외의 지역에서 사용하는 것을 목적으로 합니다.BSMI警告使用者:此為甲類資訊技術設備,於居住環境中使用時,可能會造成射頻擾動,在此種情況下,使用者

Seite 70 - 18 Click Choose Backup Disk

17Recovery Drive1 Insert a 1 GB or larger USB flash drive into a USB port on the TeraStation.Note: All data on the USB flash drive will be erased!2

Seite 71 - Amazon S3

18Chapter 2 ConfigurationConfigure and administer your TeraStation using the Settings interface, accessible from a browser window. Open the interface

Seite 72 - 8 Amazon S3 is now enabled

19Username/Password Combinations:Username Password Settings Availableadmin password Allguest blank TeraStation’s name (read-only)your username your pa

Seite 73 - Chapter 6 Remote Access

2ContentsChapter 1 Installation ...9Diagrams ...

Seite 74

20Chapter 3 Access RestrictionsYou may restrict access to specific shared folders, including external USB drives.Notes: • Access restrictions can be

Seite 75

21Notes: • Names may contain up to 27 alphanumeric characters, hyphens (-), and underscores (_). Do not use a symbol as the first character in a name

Seite 76

22AccountsYour TeraStation username and password should be the same as your Windows username and password. If they are different, you may not be able

Seite 77 - 2 Open Folder Setup

23Notes: • Usernames may contain up to 224 characters, including hyphens (-), underscores (_), periods (.), !, #, &, @, $, *, ^, and %. Do not us

Seite 78 - Chapter 7 BitTorrent

243 Enter settings, then click OK.Notes: • Group names may contain up to 224 alphanumeric characters, hyphens (-), underscores (_), and periods (.).

Seite 79

253 Click Edit.4 Enable “Access Restrictions”.5 Select the level of access for the user or group you added.: Read and write access allowed :

Seite 80 - Chapter 8 Multimedia

26the TeraStation: info, spool, lost+found, global, printers, homes, lp, authtest, ram, msdfs_root, mt-daapd, usbdisk# (where # is a number, for exam

Seite 81

272 Select Workgroup/Domain.3 Click Edit.4 Select “Active Directory”, then click Next.5 Click Yes.6 Enter the desired settings, then click OK.7

Seite 82

289 Click Edit.10 Enable “Access Restrictions”.11 Select the level of access for the user or group:: Read and write access allowed : Read acces

Seite 83 - Supported File Types

294 Click Edit.5 Select “NT Domain”, then click Next.Note: To use Active Directory from Windows 2000 or Windows Server 2003, select “Active Director

Seite 84

3Working with RAID Arrays ...34Using JBOD ...

Seite 85 - 6 Click OK, then OK again

3013 Click OK.Notes: • If you change the TeraStation’s name, you will no longer be able to use domain users and groups or access restric-tions. To re

Seite 86 - Getting Started

315 Click Yes.6 Enter a workgroup name. Select “Assign authorization to external SMB server” and enter the authentication server’s IP address (recom

Seite 87 - Installing Client Tools

3212 Select the level of access:: Read and write access allowed : Read access allowed : Access prohibited13 Click OK.Notes: • If access r

Seite 88

33Chapter 4 Managing StorageRAID ArraysTeraStations support many types of RAID. The type of RAID arrays available for use depends on how many drives a

Seite 89

34RAID 51RAID 51 arrays are available for TeraStations with 6 or more hard drives. In this mode, two RAID 5 arrays are combined into a RAID 1 array. T

Seite 90

353 Click Delete RAID Array.Once JBOD mode is configured, create shared folders on each drive to use them.Changing RAID ModeTo change the RAID mode,

Seite 91 - 4 Click Find Cameras

36Note: After changing the RAID mode, create a shared folder.Configuring a Hot SpareIf you have a hot spare configured and an array fails, the TeraSta

Seite 92

37RMM (RAID Mode Manager)With RMM, you can create or expand a RAID array without erasing the data on the drives.Changing from JBOD to RAID 1You must h

Seite 93 - 11 Click Next

38Changing the RAID mode while adding a drive:• Select the drive you want to add to the RAID array and choose the mode for the array. Enter the “Conf

Seite 94 - 2 Click Search

395 Move the RAID scanning switch to the position to enable RAID scanning.Note: Normally “I15” information message or code will be notified in NAS

Seite 95 - Configuration

4Chapter 5 Backup ...60Back Up from the TeraStation ...

Seite 96

40Dismounting DrivesIf the TeraStation is powered on, dismount drives (internal and external) before unplugging them. You may dismount any drive from

Seite 97

413 Select the drive to test, then click Check Disk.4 Click Check. You have the option of deleting information files from Mac OS during the check if

Seite 98

423 The S.M.A.R.T. information for the drive will be displayed. Different information may be displayed depending on the brand of drives in your TeraS

Seite 99

434 Select a format type, then click Format.5 The “Confirm Operation” screen will open. Enter the displayed number, then click OK.6 Depending on th

Seite 100

44Encrypting DrivesInternal drives (and arrays) can be encrypted with 128-bit AES during formatting. Encrypted drives and arrays are then readable onl

Seite 101

45• All logs deletedIf you remove a drive and then erase all data on the TeraStation, NAS Navigator2 will show the error “HDx Error E22 HDx Can’t Mou

Seite 102 - Client Utilities

46• If both user and group quotas are configured for a user, the most restrictive quota will always apply.Quotas for UsersFollow this procedure to li

Seite 103 - Live Viewer

47Size LimitsIf LVM is enabled, volumes can be created with maximum size limits. Up to 32 LVM and iSCSI volumes are supported.1 In Settings, click Dr

Seite 104 - Vault Admin

488 Configure the desired settings, then click OK.9 Click Close.10 Click Close.11 Navigate to File Sharing - Folder Setup.12 Click Create Folder.13

Seite 105 - Network Activity

49Notes: • The name may contain up to 27 alphanumeric characters, hyphens (-), and underscores (_). Do not use a symbol as the first character.• The

Seite 106 - Mini Vault Stats

5Disabling Playback from Specific Devices ...83iTunes Server ...

Seite 107

50Using the TeraStation as an iSCSI DeviceIntroductioniSCSI is a protocol for carrying SCSI commands over IP networks. Unlike traditional SAN protocol

Seite 108

51Windows 8.1, Windows 8, Windows 7, Windows Vista, Windows Server 2008, Windows Server 2012If you are using Windows 8.1, Windows 8, Windows 7, Window

Seite 109

5210 Enter a volume name, volume description, volume, and size, then click OK.11 Click Close.12 Connect the new volume. The process for this will depe

Seite 110

53Mutual Authentication with the TeraStationThe TeraStation can perform mutual authentication (two-way authentication). Dual passwords ensure that onl

Seite 111 - Troubleshooting

54OS.Expanding the Volume SizeYou can expand the size of a volume. If the iSCSI volume is on an LVM-enabled drive or array, you can also create or del

Seite 112

55Navigate to Drives - iSCSI. Select the iSCSI volume to disconnect and click Disable Connection. To reconnect the volume, click Enable Connection.Sim

Seite 113 - Chapter 10 Advanced Features

563 Click the Security tab.4 Click Edit.5 Enable “Access Restrictions”, enter the username and password, and click OK.Note: To use mutual authentic

Seite 114 - 3 Click Edit

575 Click Close.Mutual Authentication Access Restrictions by Username and PasswordTo set access restrictions using mutual authentication in addition

Seite 115

58• Do not change the order of the hard drives in the TeraStation. For example, pulling out drive 1 and replacing it with drive 2 may cause data to b

Seite 116 - Wake-on-LAN

592 Select the hard drive with the flashing status LED and click Dismount Disk.3 The status LED will stop flashing and glow steadily.4 Unlock the f

Seite 117 - Connecting a Printer

6Vault Admin ... 104Surveillance Video Manager ...

Seite 118

60Chapter 5 BackupBack Up from the TeraStationYou can back up TeraStation folders to:• A different folder on the TeraStation• Another LinkStation on

Seite 119 - Write Caching

614 Click Add, enter the IP address of the target LinkStation or TeraStation, and click Close.If your setup meets the requirements below, you don’t h

Seite 120 - 2 Click Edit

622 Click to the right of “Backup”.3 Click Create New Job.Note: Up to 8 backup jobs can be configured.4 Select backup settings such as date and t

Seite 121 - 2 Click Add Route

63Type Files includedManagement backupEach time a backup is executed, management information is stored, and only files that have changed are copied or

Seite 122 - TeraSearch

64Note: If the backup task is not added to the list, try refreshing the browser.11 Click Close.ReplicationReplication copies all data from a share to

Seite 123

657 Click Browse under “Replication Target”.8 Select the shared folder that will be the replication target, then click OK.9 Click OK.10 Click Yes.N

Seite 124 - Offline Files

66tion.• You can select subfolders as the replication source. Folders whose names contain more than 80 alphanumeric characters cannot be selected.•

Seite 125

67The main and backup TeraStations should be the same model and capacity. Use fixed IP addresses for both TeraStations. Because the IP address of the

Seite 126

68show I51 messages and the backup TeraStation will also show an I48 message.7 In the backup TeraStation’s Settings, navigate to Backup - Failover an

Seite 127 - Accessing from a NFS Client

695 Select AFP (Mac) to LAN Protocol Support and click OK.6 Click OK.7 Click Close.8 Click Backup.9 Click the icon to the right of “Time Machin

Seite 128

7Accessing from a NFS Client ... 127Encrypting Data Transmission ...

Seite 129 - Encrypting FTP Transfer Data

7016 On the Mac, open System Preferences.17 Click Time Machine.18 Click Choose Backup Disk.19 Select the TeraStation, then click Use for Backup.20 Ent

Seite 130 - Web Server

71Note: If access restrictions are not configured on the target share, log in with the administrator account. The default username and password for th

Seite 131 - 5 Click Browse

726 Select the shared folder for remote replication, then click OK.Note: This folder is used by Amazon S3. Files are not added to the selected folder

Seite 132

73Chapter 6 Remote AccessWebAccessWebAccess is a program for accessing the files in the shared folder of your TeraStation from your computer, smartph

Seite 133 - Saving and Applying Settings

74• To use SSL encryption for more secure data transfers, enable “HTTPS/SSL Encryption”.• You may use the default BuffaloNAS.com registration, or di

Seite 134 - Troubleshooting:

75they do locally. If access restrictions are not set for the shared folder, then this option will not be shown.• When a user or group can access a f

Seite 135 - Recovering the TeraStation

764 From “Target Folder”, select the shared folder that will be connected.Notes: • The selected folder is used internally by “WebAccess Remote”. Fil

Seite 136 - To transfer logs

772 Open Folder Setup.3 Choose a folder to enable remote FTP access on.4 Click Edit.5 Select read-only or read & write for the shared folder’s

Seite 137 - Updating the Firmware

78Chapter 7 BitTorrentBitTorrent is a protocol for distributing large amounts of data efficiently. The information in this chapter is for users who a

Seite 138 - To update from Settings:

795 Select the shared folder where the downloaded file will be saved, then click OK.6 Click OK.7 Move the BitTorrent switch to the position to en

Seite 139

8Mount as Network Drive... 147Changing the IP Address ...

Seite 140 - Jumbo Frames

80Chapter 8 MultimediaDLNADLNA is a set of guidelines for sharing digital media. The TeraStation includes a DLNA server compliant with the DLNA guide

Seite 141 - DHCP and IP Address

814 Enable “DLNA” under “LAN Protocol Support”, then click OK.5 Click Services.6 Move the DLNA switch to the position to enable DLNA.7 Click the

Seite 142 - Port Trunking

821 In Settings, click Services.2 Click the icon to the right of “DLNA Server”.3 Click DLNA Client Access Permissions.4 A list of the MAC addres

Seite 143 - Configuring Port Trunking

83Disabling Playback from Specific DevicesYou may block specific DLNA devices from playing back media content.1 In Settings, click Services.2 Click

Seite 144 - 6 Click Save

84Video files.avi, .divx, .asf, .mpg, .mpe, .m1v, .vob, .mts, .m2ts, .m2t, .mpeg, .mpeg2, .vdr, .spts, .tp, .ts, .3gp, .mov, .m4v, .wmv, .dvr-ms, .xvi

Seite 145 - Chapter 11 Utilities

856 Click OK, then OK again.7 Move the iTunes server switch to the position.

Seite 146

86Chapter 9 Surveillance ServerOverviewThe TeraStation supports streaming video from RTSP (Real Time Streaming Protocol) network cameras.Getting Star

Seite 147 - Mount as Network Drive

87Initial SetupInstalling Client ToolsDownload the client tools below from www.buffalotech.com and install them on your computer.Camera Policies - Reg

Seite 148 - Changing the IP Address

88• Use the dedicated utility provided with the network camera or other program to confirm that the network cam-era operates properly.Enable the Surv

Seite 149 - Mounting as a Network Drive

898 To enable surveillance cameras, change the switch to .Notes: • If the target shared folder specified as the storage location for recorded video

Seite 150

9Chapter 1 InstallationDiagrams1 Power ButtonOn: Press the power button to turn on the TeraStation.Off: Press the power button twice within 3 seconds

Seite 151 - Chapter 12 Appendix

90To deactivate the license, click .5 Check that the “SurveillanceCamera 1 camera” and “HardDisk” were added to “Installed Licenses”.The free licens

Seite 152

911 Click Start - BUFFALO - BUFFALO Surveillance Server - Camera Policies.2 Click the icon.3 Click Next.4 Click Find Cameras.5 Select the detec

Seite 153 - 2 Open the cover

92Note: Network cameras that are already in use are indicated by an asterisk (*) and they are gray.6 Enter the username and password, then click Next

Seite 154 - 8 Reconnect the power cords

939 Select the TeraStation where the video will be recorded, then click Next.10 Check the registration information, and if it is correct, click Next.

Seite 155

94An additional network camera can be registered by selecting “Yes” when asked “Do you want to add an additional camera?”12 Click Save.Recording will

Seite 156

95Email Error NotificationYou may configure the TeraStation to send you an email notification when the available space for recording is low, or when r

Seite 157 - Default Settings

963 The search results are displayed. Click a thumbnail to start the media viewer.

Seite 158 - Specifications

974 Select the section to export and click Export. This will register the video to the export queue.5 Open the Export screen, register the export in

Seite 159 - Environmental Information

98This completes exporting video in the MOV format.Viewing Video Real-timeFollow this procedure to view the video as it is being recorded by the netwo

Seite 160

993 Click the Source tab. Under “Vault”, select the TeraStation where the recorded video data is saved. Select any to migrate recorded data on all ne

Kommentare zu diesen Handbüchern

Keine Kommentare