Buffalo TeraStation III TS-RIXL Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach NAS & Speicherserver Buffalo TeraStation III TS-RIXL herunter. Buffalo TeraStation III TS-RIXL User manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken

Inhaltsverzeichnis

Seite 1 - Buffalo Inc

Network Attached StorageTeraStation III iSCSI User ManualBuffalo Inc.www.bualotech.comTS-IXLTS-RIXL35011188-06

Seite 2 - Contents

TeraStation III iSCSI User Manual 9Disconnecting and Removing TeraStationTo remove an iSCSI TeraStation, disconnect any connected volumes  rst and th

Seite 3

TeraStation III iSCSI User Manual 104Note: If a TeraStation is connected to multiple computers, unregister it from each computer.5You can now power d

Seite 4 - Introduction

TeraStation III iSCSI User Manual 11Reconnect a TeraStation To reconnect a TeraStation that was previously removed, register the device and connect a

Seite 5 - Network Structure

TeraStation III iSCSI User Manual 12Mutual AuthenticationThe iSCSI TeraStation supports mutual authentication for security. Mutual authentication ensu

Seite 6

TeraStation III iSCSI User Manual 13Chapter 3 SettingsUse the Settings menu to con gure your TeraStation.1Click Start - All Programs - BUFFALO - iSCS

Seite 7 - Adding multiple TeraStations

TeraStation III iSCSI User Manual 14Chapter 4 Using Logical Volume Manager (LVM)Enable/Disable Logical Volume Manager (LVM)Logical Volume Manager (LV

Seite 8 - Using iSCSI Connection Tool

TeraStation III iSCSI User Manual 15Create VolumeBy default, the TeraStation is congured with a single volume using all available space on the TeraSt

Seite 9 - Menu Navigation Options:

TeraStation III iSCSI User Manual 16Extending VolumesVolume space can be extended after you create the volume.Notes:• Extending the volume may delete

Seite 10

TeraStation III iSCSI User Manual 17Chapter 5 Changing RAID Modes • RAID 5 mode (4 hard drives) (factory default)Arranges 4 hard drives in one array

Seite 11

TeraStation III iSCSI User Manual 18• RAID 0 modeCombines 4 drives into one fast array. The full capacity of all drives combined is available for use.

Seite 12 - Reconnect a TeraStation

TeraStation III iSCSI User Manual 1ContentsChapter 1 Introduction ...

Seite 13 - Mutual Authentication

TeraStation III iSCSI User Manual 19Using Normal mode123Click Delete RAID Array. This will take several seconds, and the front panel display will show

Seite 14 - Settings

TeraStation III iSCSI User Manual 20Using RAID 5 mode (4 hard drives)Note: This is the default conguration.1Delete any preexisting array as describe

Seite 15 - Chapter 4

TeraStation III iSCSI User Manual 21Using RAID 5 mode (3 hard drives)1Delete any preexisting array as described in “Using Normal mode” on page 19.2345

Seite 16 - Create Volume

TeraStation III iSCSI User Manual 22Using RAID 10 mode1Delete any preexisting array as described in “Using Normal mode” on page 19.2345Note: Building

Seite 17 - Extending Volumes

TeraStation III iSCSI User Manual 23Using RAID 1 mode1Delete any preexisting array as described in “Using Normal mode” on page 19.2345Note: Building

Seite 18 - Chapter 5

TeraStation III iSCSI User Manual 24Using RAID 0 mode1Delete any preexisting array as described in “Using Normal mode” on page 19.234 56The Conrm Ope

Seite 19 - • Normal mode

TeraStation III iSCSI User Manual 25Conguring a Hot Spare A hot spare will automatically replace a failed drive in a RAID array. You must have an ext

Seite 20 - Using Normal mode

TeraStation III iSCSI User Manual 26Chapter 6 Access RestrictionsConguring Access Restrictions for the TeraStation 1234Turn iSCSI Service back on.No

Seite 21

TeraStation III iSCSI User Manual 27Conguring Access Restrictions for Individual Volumes12345Click Save.6Turn back on iSCSI Service again. Note:Acc

Seite 22

TeraStation III iSCSI User Manual 28Chapter 7 Managing your TeraStationName, Date and Time123Note:TeraStation names can contain up to 15 bytes (UTF-8

Seite 23 - Using RAID 10 mode

TeraStation III iSCSI User Manual 2Chapter 6 Access Restrictions ...

Seite 24 - Using RAID 1 mode

TeraStation III iSCSI User Manual 2956Turn iSCSI Service back on.By default, the TeraStation adjusts its clock automatically by using an NTP server. N

Seite 25 - Using RAID 0 mode

TeraStation III iSCSI User Manual 30RAID ScanningRegular RAID scans are recommended for your RAID array. A RAID scan will scour your RAID array for er

Seite 26 - Drive Failures

TeraStation III iSCSI User Manual 31Email NoticationThe TeraStation can be congured to automatically send an email notication whenever its settings

Seite 27 - Access Restrictions

TeraStation III iSCSI User Manual 32Examples: These emails are for example only. Your notication emails may be dierent. • This email includes HD

Seite 28

TeraStation III iSCSI User Manual 33For best results, plug your TeraStation in to a UPS (Uninterruptible Power Supply). This will protect it from many

Seite 29 - Managing your TeraStation

TeraStation III iSCSI User Manual 34The TeraStation can be congured to emit a beep if an error occurs. Follow the below procedure to select the event

Seite 30

TeraStation III iSCSI User Manual 35The admin account is used to access Settings and change the TeraStation’s settings. By default, the admin username

Seite 31 - RAID Scanning

TeraStation III iSCSI User Manual 36123The Conrm Operation screen will appear. Type in the conrmation number and click Apply within 60 seconds.4Foll

Seite 32 - Email Notication

TeraStation III iSCSI User Manual 37Encrypting DrivesIf Encryption is selected during formatting, the drive will be encrypted with 128-bit AES. The da

Seite 33

TeraStation III iSCSI User Manual 38Erasing All DataData on the hard drive is not completely erased by just deleting it, or even formatting the drive.

Seite 34 - UPS Settings

TeraStation III iSCSI User Manual 3Chapter 1 IntroductioniSCSICan be placed anywhereSince the drive is accessed through the network, you can place it

Seite 35 - Display Settings

TeraStation III iSCSI User Manual 39Initializing SettingsHold down the reset button until it beeps (about 5 seconds). This will reset the TeraStation’

Seite 36

TeraStation III iSCSI User Manual 40Initialization from SettingsYou can also initialize the TeraStation from Settings. The following settings are res

Seite 37 - Formatting Drives

TeraStation III iSCSI User Manual 41Changing the IP address If desired, you may manually set the TeraStation’s IP address. Use the iSCSI Connection T

Seite 38 - Dismounting a Drive

TeraStation III iSCSI User Manual 42Jumbo FrameIf all of your network devices support Jumbo Frame, enabling them can make your network faster. To con

Seite 39 - Erasing All Data

TeraStation III iSCSI User Manual 43Port trunking (link aggregation) allows you to connect the TeraStation to two Ethernet ports for increased speed a

Seite 40 - Initializing Settings

TeraStation III iSCSI User Manual 44Conguring port trunking on the TeraStation:1Connect TeraStation’s LAN port 1 to a LAN port on your switch. If you

Seite 41 - Initialization from Settings

TeraStation III iSCSI User Manual 45Chapter 8 List of Items in SettingsCommon Items (left side of the screen)Common Items (Displayed on the left side

Seite 42 - Changing the IP address

TeraStation III iSCSI User Manual 46Create VolumeTo display, click Create Volume on the Volume Conguration Screen.Volume Name Enter a name of the vol

Seite 43 - Jumbo Frame

TeraStation III iSCSI User Manual 47BasicSettingsNameClick Modify Settings to change settings.TeraStation Name Enter a name to identify the TeraStatio

Seite 44 - Port Trunking

TeraStation III iSCSI User Manual 48NetworkIP Address SettingsClick Modify Settings to change settings.*The LAN cable connected to LAN port 2 should b

Seite 45 - Online Update

TeraStation III iSCSI User Manual 4For best results, use dedicated gigabit (1000BASE-T) NICs, cabling, and routers to connect iSCSI drives. Use of slo

Seite 46 - List of Items in Settings

TeraStation III iSCSI User Manual 49SecurityAdministrator SettingsClick Modify Settings to change settings.Username You may change the admin account’s

Seite 47

TeraStation III iSCSI User Manual 50StorageDisksFormat Disk Formatting a drive or array will erase all volumes on the drive or array. After formatting

Seite 48

TeraStation III iSCSI User Manual 51RAID ScanningClick Modify Settings to change settings.RAID Scanning A RAID scan read checks all sectors in the dat

Seite 49

TeraStation III iSCSI User Manual 52MaintenanceEmail NoticationClick Modify Settings to change settings.Click Send Test Message to send a test email

Seite 50

TeraStation III iSCSI User Manual 53Alert Sound SettingsClick Modify Settings to change settings.Alert Sound Settings Beep alerts can be triggered by

Seite 51

TeraStation III iSCSI User Manual 54Restore/EraseRestore Factory DefaultsRestore TeraStation Click Restore TeraStation to initialize the following set

Seite 52

TeraStation III iSCSI User Manual 55 AppendixDefault SettingsUsername admin Password passwordDHCP Client Normally, the TeraStation will get its IP add

Seite 53 - Maintenance

TeraStation III iSCSI User Manual 56SpecicationsCheck www.bualotech.com for information about the latest products and specications.Interface (LAN P

Seite 54

TeraStation III iSCSI User Manual 57BackupBack up your data! Even the most reliable NAS device may lose data from a sudden drop or just the passage o

Seite 55

TeraStation III iSCSI User Manual 58Compliance InformationFCC WarningThis equipment has been tested and found to comply with the limits for a Class A

Seite 56 - Appendix

TeraStation III iSCSI User Manual 5Install Microsoft iSCSI Software Initiator rst.Before using iSCSI equipment with Windows XP, 2000, Server 2003, or

Seite 57 - Specications

TeraStation III iSCSI User Manual 59KC기종별 사 용 자 안 내 문A 급 기기( 업무용 정보통신기기 )이 기기는 업무용 (A 급 ) 전자파적합기기로서 판매자 또는 사용자는 이 점을 주의하시기 바라며 , 가정외의 지역에서 사용하는 것을 목적으

Seite 58 - GPL Information

TeraStation III iSCSI User Manual 6SetupNotes: • If there is a DHCP server in the network, the TeraStation will get an IP address from it automaticall

Seite 59 - Compliance Information

TeraStation III iSCSI User Manual 7Chapter 2 Using iSCSI Connection TooliSCSI Connection ToolThe iSCSI Connection Tool is automatically installed when

Seite 60

TeraStation III iSCSI User Manual 8Status Displays Current status of the selected volume.• Disconnected: Volume is disconnected.• Connected: Volume

Kommentare zu diesen Handbüchern

Keine Kommentare